floor sanding vs. Martial Arts
After we necessarily have invested much time in the cellar, it was now time to think again time to the rest of the house. The floor literally begged a question with coarse grinding wheels "stroked" to be. A Disc sander was needed. The construction equipment rental from the local hardware store provided us with a small fee to a corresponding device. ("Do not set the handle at the height of the soft parts.") A short introduction there was free. Then everything would be resolved. On the recommendation of the employee, we have to buy another 9 discs. Finally, we have used only two, because things are not to get broken. Unless the device has a Macke. And how is it so had our A. In the beginning we thought that it is due to the lack of practice and we do not master the technique. Then turned out, however, that the device has an imbalance and therefore with us true dances performed. Then, when the device so freaked out (in the truest sense of the word) that it even before its own power cord does not stop, it was enough. Especially since the switch stuck and the machine does not stop read more easily. The unit was again relegated to its final position in the hardware store. As we stated at the hardware store the characteristics of the device, we were immediately put another device. And lo and behold. It followed us, we take him, absolutely no comparison to before. Then it went ahead and right and also demanded much less effort. From our experience, here are some tips:
- Do not start the middle of the room (not even to try). The slider rotates clockwise, so the grinder Set in the direction of a wall. Then he can not run away and you can focus on to control it.
- Press On power never down. Before trying how far to move the handle up and down and can then turn in the middle position. Then move the slider not equal in the Hogfather in any direction.
- concrete grinding is like martial arts. If the force vanishes, one tries it finally with technology.
- control the sander with just the gentle movements. He also grinds when it moves slowly across the floor.
- Do not sand down too much and use the correct wheels (Anhydritestich = coarse sand cement fine =).
We have all rooms ground and would recommend to everyone to do the same. First, the floor dries better and the second is seen only after the rough grinding as yourself is the best floor. Small blooms can not avoid. With the grinder, they are easily removed and the soil is just right.
0 comments:
Post a Comment